Metal Building Insulation in Richmond, VA

Closed cell spray foam and DC 315 thermal barrier for garages, workshops, barns and warehouses. Turn your metal building into a fully conditioned space with a local crew that has served Virginia since 2012.

Locally Owned Since 2012 Closed Cell Spray Foam Free Estimates
Turn Your Metal Building Into a Conditioned Space

Metal Building Insulation from a Local Virginia Crew

Whether you’re building a garage, workshop, warehouse, storage facility or even a home, closed cell spray foam insulation is one of the most effective ways to insulate a metal building and create a comfortable, temperature-controlled space.

At Efficiency By Design, we install a complete metal building insulation system using high-performance closed cell spray foam. It is designed to control heat transfer, reduce condensation problems and make your building more comfortable and efficient to run.

Scott and Lancie Mazza started Efficiency By Design in 2012. We are licensed, bonded and insured, and our own trained crew insulates residential and commercial buildings across the Richmond area and central Virginia.

Get a Free Estimate

Closed cell spray foam with a gray thermal barrier coating on a steel roof deck, installed by Efficiency By Design
Our Metal Building Insulation System

Closed Cell Spray Foam, Finished With DC 315

We offer two foam thicknesses depending on how you plan to use the building, and every job is finished with a code-required thermal barrier coating.

1.5″

1.5 Inches of Closed Cell Foam

An effective insulation layer with vapor control properties. A good fit for garages, storage buildings and shops that need protection from heat, cold and condensation.

2″

2 Inches of Closed Cell Foam

Additional insulation and higher thermal performance for owners who want more protection against heat transfer, especially when the building will be heated and cooled.

✓

DC 315 Thermal Ignition Barrier

After the foam is applied, we cover it with DC 315, a protective coating that completes the system in accordance with applicable product requirements and building codes.

Closed cell foam typically provides about R-6 to R-7 per inch depending on the product, so the 2 inch option adds roughly a third more insulating value than 1.5 inches. We will help you choose during your free estimate.

Steel roof deck and beams sealed with closed cell spray foam and thermal barrier coating
Why Closed Cell Spray Foam

Why Metal Buildings Need a Different Kind of Insulation

Metal buildings present unique insulation challenges. Steel panels transfer heat quickly, so the inside of the building gets hot in the summer and cold in the winter. When warm, humid air reaches a cold metal roof or wall, moisture condenses on the steel. Over time that can mean dripping, rust and damp insulation.

Traditional options like bubble insulation and fiberglass may not give you the same combination of air sealing, moisture control and thermal performance. Closed cell spray foam bonds directly to the metal, creating a continuous layer that minimizes air leakage and leaves no gap between the insulation and the steel where condensation can form.

Talk to Our Team

How Spray Foam Compares

Spray Foam vs. Bubble Wrap and Fiberglass

Here is how the most common metal building insulation options stack up.

Traditional OptionsBubble Insulation & Fiberglass

Installed in sheets or rolls that are fastened to the frame.

  • Seams, gaps and fasteners let air move around the insulation
  • Warm, moist air can reach the cold steel behind it
  • Fiberglass can sag and lose performance if it gets wet

Our SystemClosed Cell Spray Foam

Sprayed directly onto the metal so it seals as it insulates.

  • Continuous layer with no seams to leak air
  • Bonds to the steel, so there is no gap for condensation
  • Rigid foam that adds strength to the surface it covers
Controls All Three Forms of Heat Transfer

How Spray Foam Keeps Your Building Comfortable

Heat moves through a metal building in three ways. Spray foam helps control all of them.

1

Radiant Heat

Helps reduce the heat entering through the building’s metal roof and walls on sunny days.

2

Conductive Heat

Slows the transfer of heat through the steel structure itself.

3

Convective Heat

Helps prevent unwanted air movement through gaps, seams and openings.

The result is a more comfortable, energy-efficient building that is easier to heat and cool.

Make Your Metal Building a Conditioned Space

One of the biggest advantages of closed cell spray foam is that it turns an ordinary metal building into a conditioned environment. Once the insulation system is installed, you can add heating and air conditioning to hold a consistent temperature all year.

Imagine your metal garage or workshop at a comfortable 70 degrees, even when it is far hotter or colder outside.

  • Climate-Controlled Workshops
  • Comfortable Garages
  • Warehouses
  • Additional Living Space
Buildings We Insulate

The Right Insulation for Your Building

Metal buildings serve a lot of purposes. Regardless of how you plan to use yours, choosing the right insulation system is an important investment in its comfort, usability and long-term performance.

We insulate new metal buildings before the interior is finished and existing buildings that have been too hot, too cold or too damp to use.

  • Residential and home structures
  • Garages and vehicle storage
  • Woodworking and fabrication shops
  • Agricultural buildings and barns
  • Commercial warehouses
  • Workshops and hobby spaces
  • Equipment and storage facilities
Our Process

How We Insulate a Metal Building

Every crew member is trained on the same process, so you get the same careful work on every job.

1

Free Estimate

We look at the building, talk through how you will use it and recommend 1.5 or 2 inches of foam.

2

Prep

Our crew covers doors, windows and anything else that should stay foam free.

3

Spray

Foam is heated in a Graco reactor, pumped through heated hose and sprayed directly onto the metal.

4

Coat

We finish the foam with DC 315 thermal ignition barrier to complete the system.

Common Questions

Metal Building Insulation FAQs

Will spray foam stop condensation in my metal building?

Condensation forms when warm, humid air touches cold metal. Closed cell spray foam bonds directly to the steel, so there is no air gap between the insulation and the metal where moisture can collect. It also acts as a vapor retarder and seals the gaps that let humid outside air in.

Should I choose 1.5 inches or 2 inches of spray foam?

1.5 inches provides an effective insulation layer and vapor control, and works well for many garages and storage buildings. 2 inches adds more thermal performance and is a better fit if you plan to heat and cool the building or spend a lot of time inside. We will recommend the right option during your free estimate.

What is DC 315 and why do you apply it over the foam?

DC 315 is a thermal ignition barrier coating made for spray foam. Building codes generally require foam insulation to be covered by a thermal or ignition barrier when it is left exposed. Applying DC 315 completes the insulation system in accordance with applicable product requirements and building codes, without needing to cover the walls with drywall.

Can I add heating and air conditioning after the building is insulated?

Yes. Making the building a conditioned space is one of the main reasons owners choose closed cell spray foam. Once the insulation system is in place, a heating and cooling system has a much easier time holding a steady temperature.

Can you insulate a metal building that is already built?

Yes. We insulate both new and existing metal buildings. If there is old insulation in the way, we will talk through removal options when we look at the building.

How much does metal building insulation cost?

Cost depends on the square footage of the walls and roof, the foam thickness you choose and how easy the building is to access. We provide free, no obligation estimates so you know the price up front.

What areas do you serve?

We serve Richmond, Chesterfield, Midlothian, Mechanicsville, Hanover, Ashland, Powhatan, Goochland, Manakin-Sabot, Charlottesville and the Northern Neck.

Testimonials

What Our Customers Say

★★★★★

“Awesome! They showed up on time and went straight to work. Extremely courteous and did a fantastic job!”

Cheryl, Richmond, VA

★★★★★

“Very friendly and efficient crew. They did good work for a very reasonable rate. Highly recommend.”

Dana, Midlothian, VA

★★★★★

“Scott was amazing. He returned my call within 5 minutes and was at my place within 5 hours and repairing our issue. Very detailed oriented!”

Peter, Ashland, VA

More Insulation Services

Explore Our Other Services

Insulating more than a metal building? We also handle attics, walls and crawl spaces.

Free Estimates

Get a Free Metal Building Insulation Estimate

Putting up a new metal building or insulating one you already own? Call us at 804-572-5729 or fill out the form and we will set up a free estimate.

  • Locally owned and serving Virginia homeowners since 2012
  • Closed cell spray foam and DC 315 installed by our own trained crew
  • Professional Graco spray foam equipment
  • Garages, shops, barns, warehouses and homes

Areas we serve: Richmond, Chesterfield, Midlothian, Mechanicsville, Hanover, Ashland, Powhatan, Goochland, Manakin-Sabot, Charlottesville and the Northern Neck.

Schedule a Free Quote

Call 804-572-5729 or fill out the form below.